Lava Flair Z1 Flash File Stock Rom Firmware Guide

Want to flash the stock ROM file on your Lava Flair Z1, then you are in the right place. In this guide, you can flash the stock firmware file to troubleshoot any issues or problems on your device. Yes! With this guide, you can resolve problems such as WiFi and Bluetooth issues, unbrick your device, resolve lag or bad performance, and also fix any software related problems.

To flash the stock ROM file on your Lava Flair Z1, we are using the SPD Flash tool aka Spreadtrum Flash Tool as this device is powered by Spreadtrum SoC. We have shared all the pre-requisites files to download and install the stock ROM on your device.

Why We Need Stock Firmware?

Stock Firmware or a Stock ROM is official software that is designed by the OEM manufacturer for a particular device. This file is required to fix any software related issue on your Lava Flair Z1. If you are facing any problem with your device, your final attempt will be to re-install the stock ROM. This way, you can restore your device back to stock ROM. This guide will be more useful to those users who always want to try rooting, installing mods or custom ROM.

Advantage of Stock ROM:

Here are the answers to why you need to download and save the Lava Flair Z1 Stock ROM flash file on your computer.

If your device is dead, you can unbrick using Stock ROM file
You can fix or repair the IMEI on your device using DB files from Stock ROM
Remove any malware or Adwares from Lava Flair Z1
You can fix the boot loop issue on Lava Flair Z1
Fix Unfortunately, the app has stopped error on Lava Flair Z1
Fix Network related issue
Patch Boot image to Root using Magisk: Mediatek Guide or Spreadtrum Guide
You can unroot Lava Flair Z1
To Reset or Remove FRP on your device: Mediatek FRP Guide or Spreadtrum FRP Guide
Restore Lava Flair Z1 back to Factory State

How to Flash Lava Flair Z1 Firmware File

Before installing the Stock ROM on your Lava Flair Z1, you should download the firmware file. Then download and install the USB Drivers and flash tool on the PC as well. Once you’re done with these, you can proceed to the steps below. But let’s take a quick look at the Stock Firmware importance and firmware details below.

Firmware Details:

Device Name: Lava Flair Z1
ROM Type: Stock ROM
Gapps File: Included
Tool Supported: SPD Flash Tool
Processor: Spreadtrum SC7731e SoC
Android Version: Android 7.0 Nougat

Pre-Requirements:

Supported device: Lava Flair Z1
Make sure to charge your device more than 50%
You need a PC or Laptop with a USB cable.
Take a complete backup using any method given below
Full Data Backup without Root
Nandroid Backup via TWRP
Download Drivers and Tools: Spreadtrum USB drivers, SPD Flash Tool and Lava USB Drivers